GPSLockbox | Wiring Step Guides

Wiring Step Guides
PTT Wiring Step Guide for 2.4A Power & PTT Amplifier
PTT 2.4 A POWER UNIT INSTALLATION Connect the black (ground) wire to the metal body of the vehicle with a self-tapping screw. Alternatively, you may use an existing, grounded screw or bolt (if available). Connect the red wire to a constant, hot, ...
Power Point on Wiring Steps
Thank you for purchasing our GPSLockbox equipment, we always strive to help make your purchase as easy as possible to help answer any questions you may have. We have come up with some step by step guides to assist our customers who decide to install ...

Recent Articles
Swapping Out Tab E to Tab A Cradle
This "How To" video walks step-by-step through the process of swapping out an existing GPS Lockbox Flex Tab E cradle with the new and improved Flex Tab A cradle. More Information please call or email us! 866-824-4023 service@gpslockbox.com ...
Troubleshoot Amplifier Quick Guide
Troubleshooting for GPS Lockbox Amplifier Initial Step to Take Use a Tablet / Phone that you know is working correctly and try this on the unit you suspect has a bad amplifier to test it. This will let ...
Quick Guide Troubleshooting Microphones
Troubleshooting for GPS Lockbox PTT Kit Initial Step to Take Use a Tablet / Phone that you know is working correctly and try this on the unit you suspect has a bad microphone to test it. This will let you know if there may be an issue with the ...
Mandatory Requirement For ELD In Trucks
Every commercial truck driver will be required to comply with electronic logging mandate. If you were utilizing (AOBRD) automatic onboard recording device, fear not for The Federal Motor Carrier Safety Administration has extended the compliance ...
No Power To Amplifier
Welcome to our interactive troubleshooting guide click link below: No Power To Amplifier Service@gpslockbox.com (866) 824-4023

GPSLockbox | Wiring Step Guides | Knowledge Base